아답터는 클램프 미터의 측정 능력임을 향상시키도록 설계한 것이다.
MULTI- TRAN 을 사용할 경우 측정 범위를 늘릴 수 있을 뿐 아니라
더 큰 직경의 전선을 고정할 수 있다 .
|
 |
|
| |
 |
Clamp your instrument around the pick-up coil of the multitran. Then, clamp the transformer jaws of the multi-tran on the conductor, as shown below. Multiply the reading of your clamp meter by 10 to obtain the current value measured. | |
|
| |
|
|
| |
| Measuring Range |
0~3000A AC |
| Ratio/Range |
10 : 1 (input to output) |
| Accuracy |
|±2% of input±0.5A |
Allowable
Measurement Time |
0~1000A (continuous), 1000~1500A (10 minutes max.)
3000A (30 seconds max.) |
| Conductor Size |
Ø100mm max.(100 × 150mm) |
| Frequency Response |
50Hz/60Hz |
| Safety Standard |
IEC61010-1 CAT.III 300V Pollution Degree 2 |
| Withstand Voltage |
3000V AC for 1 minute |
| Dimensions |
317(L) × 150(W) × 30(D)mm
45(L) × 40(W) × 10(D)mm Output coil |
| Weight |
750g approx. |
| Accessories |
9056(Carrying Case) |
For use with
following models * |
2002PA, 2002R, 2003A(AC only), 2004(AC only), 2006, 2007A(AC only), 2009A(AC only), 2608A, 2805, 2017, 2027, 2037(AC only), 2412, 2417, 8113(AC only), 2031, 2033(AC only), 2431, 2432, 2433, 2433R, 2434 | |
|
)
